Clickbank Products
It is important to measure and monitor the heart rate when exercising. The monitoring is done using a polar heat rate checker. The checker uses a polar heart rate monitor battery, which gets used up over time. The manual for the heart rate monitor clearly indicate that replacing the battery could void the warranty on the device.
The replacement of the device power source should be done by an authorized dealer. This is because there is the risk of breaking the water resistant seal, and ultimately destroying the warranty for the device. It is a no wonder the makers of the implement strongly advice against changing the batter of the grader by yourself.
The way this replacing can be done at home is outlined in this article. Open the little screws on the back of the device using the right screwdriver. Then remove the back cover of the heart grade device.
Those interested in doing the replacing at home should make sure that they have a well-fitting screwdriver. Use this to open the four little screws which are located on the back of the polar tool. Then gently remove the back cover of the monitor.
After removing the back cover, you then remove the internal unit from the case of the watch. This is done by pulling out the internal unit. Get something like a screwdriver to pry the power-tool tab with. The most preferable for use here is the screwdriver, although many other implements can be used for this same purpose.
Still using the same screw driver, gently remove the latch supporting the battery and force the battery out. This is the most sensitive stage as one risks totally destroying the seal and therefore breaking the warranty. The seal is by this stage exposed, and it should be kept clean.
Through the gentle forcing the batt will be forced out. From here you then need to get the exact same battery from the store, or even from online shops. The batt may be fetched for something close to $3.50. When buying the batt you need to make sure that it matches with the one that has been removed.
You may then fix the newly purchased one and screw back the system to one piece. The implement should be in working order, and if you did not break the water resistant seal, the instrument will still be under a valid warranty. This is simply a guide of changing the polar heart rate monitor battery and you should be careful not to destroy the tool.
The replacement of the device power source should be done by an authorized dealer. This is because there is the risk of breaking the water resistant seal, and ultimately destroying the warranty for the device. It is a no wonder the makers of the implement strongly advice against changing the batter of the grader by yourself.
The way this replacing can be done at home is outlined in this article. Open the little screws on the back of the device using the right screwdriver. Then remove the back cover of the heart grade device.
Those interested in doing the replacing at home should make sure that they have a well-fitting screwdriver. Use this to open the four little screws which are located on the back of the polar tool. Then gently remove the back cover of the monitor.
After removing the back cover, you then remove the internal unit from the case of the watch. This is done by pulling out the internal unit. Get something like a screwdriver to pry the power-tool tab with. The most preferable for use here is the screwdriver, although many other implements can be used for this same purpose.
Still using the same screw driver, gently remove the latch supporting the battery and force the battery out. This is the most sensitive stage as one risks totally destroying the seal and therefore breaking the warranty. The seal is by this stage exposed, and it should be kept clean.
Through the gentle forcing the batt will be forced out. From here you then need to get the exact same battery from the store, or even from online shops. The batt may be fetched for something close to $3.50. When buying the batt you need to make sure that it matches with the one that has been removed.
You may then fix the newly purchased one and screw back the system to one piece. The implement should be in working order, and if you did not break the water resistant seal, the instrument will still be under a valid warranty. This is simply a guide of changing the polar heart rate monitor battery and you should be careful not to destroy the tool.
About the Author:
Visit PolarHeartRateMonitorFT1.net to get a summary of Polar heart rate monitor features and instructions on how to replace Polar heart rate monitor batteries.
Aucun commentaire:
Enregistrer un commentaire